6-19Using the Picture Recording FunctionAutomatic Downloading by NotificationYou will not be able to record images if there is insufficient space on the server. The VB-C50Fican receive a low server capacity notification sent from the server when available space on theserver falls below the value set, and automatically downloads images to a specified PC, therebyincreasing the available space on the server.1. Choose “Automatic Download by Notification” in the “Tools” menu bar.2. Perform the settings relating to notification.q Server ListDisplays a list of the servers from which the imagescan be downloaded. The settings relating tonotification of each server registered with this tool(→ P.6-10) are shown in this list.“Server Name”Displays the names of the servers registered withthis tool.“Notification”Displays the setting for whether the server will send a low server warning message whenavailable space on the server reaches the value set (→ P.6-20).“Free space (MB)”Displays the setting value for available space on the server. When available space hasfallen below this setting, the server sends a low server capacity warning message.“Host”Displays the name of the host which will send the low server capacity warning message.“Port”Displays the TCP port of the host.w Server status display areaDisplays the status of the selected server. Depending on the server conditions, you may ormay not be able to specify settings in the “Server Setting” button and the “NotificationSettings” button.“This Notification Function is available for this server”Both the “Server Setting” and “Notification Settings” buttons are available.“The server does not support the Notification Function” and “Failed to connect tothe server”The “Server Setting” button is available but the “Notification Settings” button is not.“This server information is invalid”The “Server Setting” button is available but the “Notification Settings” button is not.“None”Neither the “Server Setting” button nor the “Notification Settings” button is available.e Reception Port No.Specifies the TCP port number which will receive the low server capacity warning messagefrom the server. The default is 1906.Using VBCollectorqwry et
