6-6Using the Motion Detection Function with a Predetermined ScheduleBy running the motion detection function according to a schedule, you can construct a monitoringsystem that records pictures in accordance with a preset schedule and that operates in responseto variations in the video image from the area covered by the camera. The recorded pictures arestored in the VB-C50Fi’s memory (→ P.3-25).Sample application in combination with a warning deviceIn this monitoring system, a warning tone is emitted when someone enters through the door andthe VB-C50Fi camera mounted on the ceiling captures a still picture. Connect the devices belowto each connector of the Multi-Terminal Module and set up.○ ○ ○ ○ ○ ○Installation ExampleWhen the camera shootingthe area inside the doordetects a change, an ONevent occurs.In response to that event,a warning tone is issued bythe Out1 control, thecamera shoots a picture ofthe entrance.TipPlease refer to the Multi-Terminal Module User’s Manual for how to connect the Multi-Terminal Module to the VB-C50Fi.Multi-TerminalModule (VB-EX50)EthernetMotiondetectedWarningdeviceVB-C50FiPowersupplyunitWarning deviceON/OFF
