4-63VB Administration ToolsOperating a CameraThe Admin Viewer provides camera control methods not available in the Viewer for PC or Viewerfor Java.Advanced Camera ControlIn the dialog box, you can set the focus and speed, and control the zoom by pressing the respectivebutton to start and releasing the button to stop.○ ○ ○ ○ ○ ○To Make Settings...1. Click the “Advanced camera control” buttonon the toolbars.2. The Advanced Camera Control box appears.q Pan & Tilt/Home buttonsPan and Tilt movements occur in the direction of the arrowson the buttons. Operation occurs when the button is helddown and stops when it is released. The center button isthe Home button which, when clicked, returns the camerato its home position.* Not available with the VB-C50Fi.w “AF/MF” buttonDisplays a dialog box for switching between Auto Focusand Manual Focus.Auto: Auto focus.Auto (for domes): For the camera used in combination with a camera dome so that auto focusdoes not focus on the camera dome wall surface.Fixed at infinity: Enables focusing on infinity.* “Auto (for domes)” and “Fixed at infinity” is not available if you configure the Night Mode settings(→ P.4-65).Manual: Hold Down the Far or Near buttons to adjust the focus.e “Speed” buttonDisplays a dialog box for camera operation speed.Pan/tilt speed: Select a pan and tilt speed from Fast, Normal or Slow.Zoom speed: Select a zoom speed from Fast or Slow.Focus speed: Only available with the NU-700, select a focus speed from Fast or Slow.* With the VB-C50Fi, you can only change the zoom speed.r “Zoom” buttonLets you zoom in or zoom out. Zoom occurs when the button is held down and stops when it isreleased.rweqAdmin ViewerTipWhen you set the “Focus Mode” to the “Fixed at Infinity”, the VB-C50Fi zooms in andzooms back to adjust the focus automatically.
