First Time Settings24Changing the Time Zone Default value1 Press .2 Select ( ) [DATE/TIME SETUP]and press .3 Select ( ) [T.ZONE/DST] andpress .The time zone setting appears. Thedefault setting is New York.4 Select ( ) your time zone andpress .To adjust for daylight saving time,select the time zone with the marknext to the area.Time ZonesOnce you have set the time zone, dateand time, you do not need to reset theclock every time you travel to anothertime zone. Select the time zone referringto the date and time displayed on thescreen.Setting the Date and Time1 Press .2 Select ( ) [DATE/TIME SETUP]and press .3 Select ( ) [DATE/TIME] and press.Blinking arrows will be displayedaround the month.4 Select ( ) the month and press.• Blinking arrows will be displayedaround the next field in the date/time.• Set the day, year, hours and minutesin the same way.5 Press to close the menu andstart the clock.IMPORTANT When you do not use the camcorder for about3 months, the built-in rechargeable lithiumbattery may discharge completely and the dateand time setting may be lost. In such case,recharge the battery ( 81) and set the timezone, date and time again. You can also change the date format ( 37).DATE/TIME SETUPT.ZONE/DST NEW YORKMENU( 22)MENUSETSETSETDATE/TIME SETUPDATE/TIME JAN. 1, 2006 12:00 AMMENU( 22)MENUSETSETSETMENU
