Chapter 33-21F-3-1443) Remove the resin E-ring [1]; then, remove the roller arm [2], and detachthe pickup roller [3].F-3-1453.4.7 Separation Rollor3.4.7.1 Removing the Front Cover 0011-81441) Remove the front cover [1].-Three screws [2] (remove)-One screw [3] (loosen)F-3-146F-3-147F-3-1483.4.7.2 Removing the Main Cover 0011-81431) Open the upper cover, and insert a screwdriver from above the hook; then,remove the two hooks [1].F-3-1492) Free the hook of the pickup assembly cover [2] from the right stay; then,detach it while paying attention to the hooks on the front and rear sideplates.F-3-1503) When you have removed the ADF controller cover, disconnect the con-nector [3] of the ADF controller PCB; then, remove the screw [4], and re-move the grounding wire [5]. Free the harness from the wire saddle [6],and detach the other saddle [7].[2]Free the claws,and detach the cover.[1] [2] [3][1][1][2]Hooks
