Chapter 33-26F-3-1785) Move the side guides (front) [1]/(rear) [2] to the inside; then, remove thetwo screws [3], and detach it.F-3-179After mounting it, be sure to adjust the horizontal registration.3.4.10 Manual Feed Registration Roller3.4.10.1 Removing the Front Cover 0011-81991) Remove the front cover [1].-Three screws [2] (remove)-One screw [3] (loosen)F-3-180F-3-181F-3-1823.4.10.2 Removing the Main Cover 0011-81981) Open the upper cover, and insert a screwdriver from above the hook; then,remove the two hooks [1].F-3-1832) Free the hook of the pickup assembly cover [2] from the right stay; then,detach it while paying attention to the hooks on the front and rear sideplates.Push. Freed.[5][7][4][6][3][3] [1][2][3][1][1]
