Chapter 33-13.1 Removing from the Host Machine3.1.1 Feeder3.1.1.1 Disconnecting the DADF 0011-24291) Turn off the copier.2) Disconnect the DADF's communication cable [1] from the copier.F-3-13) Open the DADF fully.4) Standing at the rear of the copier, lift the DADF to detach.MEMO:The hinge foot is equipped with a locking mechanism, requiring the DADFto be fully opened for removal.F-3-23.2 External Covers3.2.1 External Covers3.2.1.1 External Covers 0011-2427[1] Body front cover[2] Main cover[3] Original tray[4] Upper cover[5] ADF controller coverF-3-33.2.2 Front Cover3.2.2.1 Removing the Front Cover 0011-24331) Remove the front cover [1].-Three screws [2] (remove)-One screw [3] (loosen)F-3-4F-3-5F-3-63.2.3 Main Cover3.2.3.1 Removing the Main Cover 0011-32991) Open the upper cover, and insert a screwdriver from above the hook; then,remove the two hooks [1].F-3-72) Free the hook of the pickup assembly cover [2] from the right stay; then,detach it while paying attention to the hooks on the front and rear sideplates.[1]Lift.[5][1][4][3] [2][1][1]
