Chapter 33-7F-3-433.3.3.4 Removing the Delivery Motor 0011-24851) Remove the screw [1] from the bottom of the DADF, and remove the bear-ing [2] and the rod [3].F-3-442) Remove the four screws [1], and detach the hinge (right) [2].F-3-454) Remove the screw [1], and detach the delivery motor sensor [2].F-3-464) Remove the grip ring [1], and detach the lock plate [2].5) Remove the E-ring [3], and remove the belt retaining washer [4] andthe gear [5].6) Remove the screw [6], and detach the delivery motor [7].F-3-47If you have replaced the delivery motor, be sure to adjust the sensor and thedelivery motor.3.3.4 Separation Motor Unit3.3.4.1 Removing the Front Cover 0011-91011) Remove the front cover [1].-Three screws [2] (remove)-One screw [3] (loosen)F-3-48F-3-49F-3-503.3.4.2 Removing the Main Cover 0011-91021) Open the upper cover, and insert a screwdriver from above the hook; then,remove the two hooks [1].[1] [1][1][1][3][2][2] [3] [1][1][1][1] [2][1][1][2][1][6][2][5][3][4][7][1]
