Chapter 22-232.6.2 CW Pickup/Delivery Fixed Reading 0011-7304In fixed reading, the original is held in place on the copyboard glass, and is read by the scanner being moved by the host machine. Specifically,a. Single-Sided Original1) The machine picks up the 1st original, and butts its lead edge against the registration roller to remove the skew. (For details of pickup operation, see 'OriginalPickup/Separation.')F-2-36The machine rotates the registration roller and the transport belt to move the 1st original.When the trail edge of the 1st original has moved past the pull-off roller, the machine starts pickup of the 2nd original. (advance pickup)F-2-373) The machine rotates the registration roller and the transport belt to move the 1st original.The machine moves the 1st original using the transport belt over a specific distance after its trail edge has moved past the pre-registration roller sensor (S2),determining the original stop position.F-2-384) The host machine starts printing operation using its scanner.F-2-395) When the host machine's scanner starts to move in reverse, the machine rotates the transport belt in reverse to move the 1st original in the direction of delivery.At the same time, the machine rotates the registration roller to move the 2nd original.F-2-406) The machine moves the 1st and 2nd originals using the transport belt; rotating it over a specific distance after the trail edge of the 2nd original has moved pastthe pre-registration roller paper sensor (S2) to determine the stop position for the 2nd original.The machine moves the 1st original in the direction of delivery, stopping it on the copyboard glass.Registration roller1st originalRegistration roller Transport belt2nd originalPull-off rollerPre-registrationroller paper sensor(S2)Transport belt2nd original
