Chapter 33-103.3.5.3 Removing the Separation Motor Unit 0011-81331) Remove the screw [1], and detach the separation motor sensor supportplate [2].F-3-652) Disconnect the two connectors [1].F-3-663) Remove the three mounting screws [1], and detach the separation motorunit [2].F-3-673.3.5.4 Removing the Pickup Motor Unit 0011-81341) Disconnect J601 [1] and J602 [2], and free the cable from the edge saddle[3].F-3-682) Remove the two screws [1], and detach the belt motor driver PCB unit[2].F-3-694) Detach the fan mtor unit [1] by removing the two screws [2].F-3-705) Disconnect the pick up motor unit [1] connecter [2] and open/ closedsensor (rear) [3] connecter [4].F-3-716) Remove the two mounting screws [1], and detach the pickup motorunit [2].F-3-723.3.5.5 Removing the Belt Motor Unit 0011-34483) Remove the three screws [1], and detach the belt motor unit [2].[2][1][1][1][1] [2][1] [2][3][1][2][1][2][2][1][4][3][1][2]
