Chapter 33-18F-3-1228) Remove the E-ring [2] at the rear of the separation roller [1] to detach theseparation belt [3].F-3-1233.4.5 Delivery Roller3.4.5.1 Disconnecting the DADF 0011-81411) Turn off the copier.2) Disconnect the DADF's communication cable [1] from the copier.F-3-1243) Open the DADF fully.4) Standing at the rear of the copier, lift the DADF to detach.MEMO:The hinge foot is equipped with a locking mechanism, requiring the DADFto be fully opened for removal.F-3-1253.4.5.2 Removing the Front Cover 0011-81391) Remove the front cover [1].-Three screws [2] (remove)-One screw [3] (loosen)F-3-126F-3-127F-3-1283.4.5.3 Removing the Main Cover 0011-81401) Open the upper cover, and insert a screwdriver from above the hook; then,remove the two hooks [1].F-3-1292) Free the hook of the pickup assembly cover [2] from the right stay; then,detach it while paying attention to the hooks on the front and rear sideplates.[1][2][3][2][3][1][1]Lift. [1][1]
