Chapter 33-8F-3-512) Free the hook of the pickup assembly cover [2] from the right stay; then,detach it while paying attention to the hooks on the front and rear sideplates.F-3-523) When you have removed the ADF controller cover, disconnect the con-nector [3] of the ADF controller PCB; then, remove the screw [4], and re-move the grounding wire [5]. Free the harness from the wire saddle [6],and detach the other saddle [7].F-3-534) Remove the four screws [1], and detach the main cover [2].The main cover is fitted with the original tray [3], and cables are connectedto it. Take extra care when removing it not to damage the cables.F-3-543.3.4.3 Removing the Separation Motor Unit 0011-33521) Remove the screw [1], and detach the separation motor sensor supportplate [2].F-3-552) Disconnect the two connectors [1].F-3-563) Remove the three mounting screws [1], and detach the separation motorunit [2].F-3-57[1][1][2]HooksPush. Freed.[5][7][4][6][3][1] [1][1][1][3][2][2][1][1][1][1] [2]
