YASKAWA P1000 Quick Start Manual

Also see for P1000: Technical manual Quick start guide Safety precautions Technical manual Installation manual

Contents

YASKAWA P1000 Quick Start Manual Manual pdf 50 page image

u Models 2A0110 to 2A0250, 4A0208 to 4A0675, and 5A0125 to 5A0242 (IP00/Open TypeEnclosure)n Removing the Terminal Cover1. Loosen the screws on the terminal cover, then pull down on the cover.Note: The terminal cover and the number of terminal cover screws differ depending on the drive model.CAUTION!Do not completely remove the cover screws, just loosen them. If the cover screws are removed completely, the terminalcover may fall off causing an injury.Figure 3.12 Removing the Terminal Cover on an IP00/Open Type Enclosure Drive2. Pull forward on the terminal cover to free it from the drive.Figure 3.13 Removing the Terminal Cover on an IP00/Open Type Enclosure Driven Reattaching the Terminal CoverAfter wiring the terminal board and other devices, double-check connections and reattach the terminal cover. Refer to Wiringthe Main Circuit Terminal on page 65 and Wiring the Control Circuit Terminal on page 69 for details on wiring.<1>Figure 3.14 Reattaching the Terminal Cover on an IP00/Open Type Enclosure Drive<1> Connect the ground wiring first, then the main circuit wiring, and finally the control circuit wiring.3.3 Terminal Cover50 YASKAWA ELECTRIC TOEP YAIP1U 01B YASKAWA AC Drive - P1000 Quick Start Guide