YASKAWA P1000 Quick Start Manual

Also see for P1000: Technical manual Quick start guide Safety precautions Technical manual Installation manual

Contents

YASKAWA P1000 Quick Start Manual Manual pdf 231 page image

No.(Addr.Hex) Name Description Analog Output Level UnitU3-41(301F) Time Hours and Minutesat 7th Most Recent Fault Displays the time when the seventh most recent fault occurred. No signal outputavailable –U3-42(3020) Date Year at 8th MostRecent Fault Displays the year when the eighth most recent fault occurred. No signal outputavailable –U3-43(3021) Date Month and Day 8th atMost Recent Fault Displays the date and day when the eighth most recent fault occurred. No signal outputavailable –U3-44(3022) Time Hours and Minutesat 8th Most Recent Fault Displays the time when the eighth most recent fault occurred. No signal outputavailable –U3-45(3023) Date Year at 9th MostRecent Fault Displays the year when the ninth most recent fault occurred. No signal outputavailable –U3-46(3024) Date Month and Day at 9thMost Recent Fault Displays the date and day when the ninth most recent fault occurred. No signal outputavailable –U3-47(3025) Time Hours and Minutesat 9th Most Recent Fault Displays the time when the ninth most recent fault occurred. No signal outputavailable –U3-48(3026) Date Year at 10th MostRecent Fault Displays the year when the tenth most recent fault occurred. No signal outputavailable –U3-49(3027) Date Month and Day at10th Most Recent Fault Displays the date and day when the tenth most recent fault occurred. No signal outputavailable –U3-50(3028) Time Hours and Minutesat 10th Most Recent Displays the time when the tenth most recent fault occurred. No signal outputavailable –u U4: Maintenance MonitorsNo.(Addr.Hex) Name Description Analog Output Level UnitU4-01(4C) Cumulative OperationTimeDisplays the cumulative operation time of the drive. The value for thecumulative operation time counter can be reset in parameter o4-01. Useparameter o4-02 to determine if the operation time should start as soon asthe power is switched on or only while the Run command is present. Themaximum number displayed is 99999, after which the value is reset to 0.No signal outputavailable 1 hU4-02(75) Number of RunCommandsDisplays the number of times the Run command is entered. Reset thenumber of Run commands using parameter o4-13. This value will reset to0 and start counting again after reaching 65535.No signal outputavailable 1 TimeU4-03(67) Cooling Fan OperationTimeDisplays the cumulative operation time of the cooling fan. The default valuefor the fan operation time is reset in parameter o4-03. This value will resetto 0 and start counting again after reaching 99999.No signal outputavailable 1 hU4-04(7E) Cooling Fan Maintenance Displays main cooling fan usage time as a percentage of its expectedperformance life. Parameter o4-03 can be used to reset this monitor.Replace the fan when this monitor reaches 90%.No signal outputavailable 1%U4-05(7C) Capacitor Maintenance Displays main circuit capacitor usage time as a percentage of their expectedperformance life. Parameter o4-05 can be used to reset this monitor.Replace the capacitor when this monitor reaches 90%.No signal outputavailable 1%U4-06(7D6) Soft Charge Bypass RelayMaintenanceDisplays the soft charge bypass relay maintenance time as a percentage ofits estimated performance life. Parameter o4-07 can be used to reset thismonitor.Replace the soft charge bypass relay when this monitor reaches 90%.No signal outputavailable 1%U4-07(7D7) IGBT Maintenance Displays IGBT usage time as a percentage of the expected performancelife. Parameter o4-09 can be used to reset this monitor.Replace the IGBT when this monitor reaches 90%.No signal outputavailable 1%U4-08(68) Heatsink Temperature Displays the heatsink temperature. 10 V: 100 °C 1 °CU4-09(5E) LED Check Lights all segments of the LED to verify that the display is workingproperly. No signal outputavailable –U4-10(5C) kWh, Lower 4 Digits Monitors the drive output power. The value is shown as a 9-digit numberdisplayed across two monitor parameters, U4-10 and U4-11.Example:12345678.9 kWh is displayed as:U4-10: 678.9 kWhU4-11: 12345 MWhNo signal outputavailable 1 kWhU4-11(5D) kWh, Upper 5 Digits No signal outputavailable 1 MWhB.12 U: MonitorsYASKAWA ELECTRIC TOEP YAIP1U 01B YASKAWA AC Drive - P1000 Quick Start Guide 231B Parameter List