Xerox N2125N - DocuPrint B/W Laser Printer Service Manual

Also see for DocuPrint N2125: Product reference guide Specification sheet User guide User guide System administrator guide

Contents

Xerox N2125N - DocuPrint B/W Laser Printer Service Manual Manual pdf 80 page image

02/20003-7DocuPrint N2125 Deletions , FusingImage Quality Repair Analysis ProceduresInitial IssueDeletions (Line, Band, Spots)ProcedureInspect Test Prints for the presence of deletions (missing image). There should be no deletionswith a diameter larger than 0.5 mm visible on test prints (Figure 1). There are deletions onthe test prints.Y NGo to Fusing.There are vertical (in direction of paper movement) Line/Band deletions present.Y NThere are Horizontal (in direction of scanning) Line/Band Deletions present.Y NThere are Spot Deletions present.Y NGo to Fusing.Go to IQ RAP 6 Spot Deletions.Go to IQ RAP 4 Horizontal Deletions.Go to IQ RAP 5 Vertical Deletions.Figure 1 Line, Band, or Spot Deletions.FusingProcedureNOTE: The operating environment of the printer is from 41° F (5° Celsius) at 15% relativehumidity to 95° F (35° Celsius) at 85% relative humidity. The fusing performance of the printerwill vary according to the environment.• A cold environment will affect the warm-up time.• The weight (lb. / gsm) of the paper or transparency will affect the fusing of prints.• High humidity will have an adverse affect on the fusing of prints.Check the fusing quality of the image of a System Controller Test Print (Figure 1). Rub theimage three times with a soft cloth or tissue. The image should not lift off of the surface of theprint. The fusing quality of the image meets the specification.Y NGo to IQ RAP 17 Unfused Image.Go to Resolution.Figure 1 Fusing Quality.manuals4you.commanuals4you.com