Xerox N2125N - DocuPrint B/W Laser Printer Service Manual

Also see for DocuPrint N2125: Product reference guide Specification sheet User guide User guide System administrator guide

Contents

Xerox N2125N - DocuPrint B/W Laser Printer Service Manual Manual pdf 169 page image

02/20004-70 DocuPrint N2125REP 10.6, REP 10.7Initial IssueRepair-AdjustmentREP 10.6 Inner Exit Chute AssemblyParts List on PL 14.1RemovalWARNINGSwitch off the power and disconnect the Power Cord.1. Remove the Offset Catch Tray (REP 10.1).2. Remove the Exit Tray Extension (REP 10.2).3. Remove the Exit Tray (REP 10.3).4. Turn the Offset Catch Tray upside down.5. Remove the Lower Cover (REP 10.5).6. Remove the five screws that secure the Inner Exit Chute Assembly (Figure 1).7. Hold open the Rear Cover.8. Remove the assembly (Figure 1).Figure 1 Inner Exit Chute AssemblyReplacement1. Reinstall the components in the reverse order.REP 10.7 Offset Catch Tray PWBParts List on PL 14.2RemovalCAUTIONThese components are susceptible to electrostatic discharge. Observe all ESD procedures toavoid damage.WARNINGSwitch off the power and disconnect the Power Cord.1. Remove the Offset Catch Tray (REP 10.1).2. Remove the Exit Tray Extension (REP 10.2).3. Remove the Exit Tray (REP 10.3).4. Turn the Offset Catch Tray upside down.5. Remove the Lower Cover (REP 10.5).6. Hold open the Rear Cover.7. Remove the Inner Exit Chute Assembly (REP 10.6).8. Remove the screw that secures the PWB to the Inner Exit Chute Assembly (Figure 1).9. Disconnect P/J209, P/J224, P/J210, and P/J229 (Figure 1).10. Remove the Offset Catch Tray PWB (Figure 1).Figure 1 Offset Catch Tray PWBReplacement1. Reinstall the components in the reverse order.