02/20004-19DocuPrint N2125 REP 3.1, REP 3.2Repair-AdjustmentInitial IssueREP 3.1 Paper FeederParts List on PL 3.1RemovalWARNINGSwitch off the power and disconnect the Power Cord.1. Remove Tray 1.NOTE: Remove all Optional 550 Sheet Feeders.2. Remove the Left Interface Cover Assembly (REP 1.1).3. Remove the Left Cover (REP 1.2).4. Remove the Front Cover Assembly (REP 1.6).5. Remove the Left Front Cover (REP 1.7).6. Remove the Left Plate Assembly (REP 1.11).7. Remove the Plate Handle (REP 1.12).8. Open Rear Door.9. Remove the Top Cover Assembly (REP 1.4).10. Remove the Right Cover (REP 1.5).11. Remove the LVPS PWB (REP 9.5).12. Remove the seven screws that secure the Paper Feeder to the printer (Figure 1).13. Pull the Paper Feeder toward the front to remove (Figure 1).Figure 1 Paper FeederReplacement1. Reinstall the components in the reverse order.REP 3.2 Turn Roll AssemblyParts List on PL 3.1RemovalWARNINGSwitch off the power and disconnect the Power Cord.1. Remove Tray 1.2. Remove the Left Interface Cover Assembly (REP 1.1).3. Remove the Left Cover (REP 1.2)4. Remove the Front Cover Assembly (REP 1.6).5. Remove the Left Front Cover (REP 1.7).6. Remove the Left Plate Assembly (REP 1.11).7. Remove the Plate Handle (REP 1.12).8. Open Rear Door.9. Remove the Top Cover Assembly (REP 1.4).10. Remove the Right Cover (REP 1.5).11. Remove the LVPS PWB (REP 9.5).12. Remove the Paper Feeder (REP 3.1).13. Disconnect P/J64 on the Feeder PWB (Figure 1). Release cable from all cable clamps.14. Remove the four screws that secure the Turn Roll Assembly to the Paper Feeder Assem-bly (Figure 1).15. Remove the Turn Roll Assembly together with the Extension Spring and Chute Spring(Figure 1).Figure 1 Turn Clutch AssemblyReplacement1. Reinstall the components in the reverse order.manuals4you.commanuals4you.com
