02/20004-60 DocuPrint N2125REP 9.5, REP 9.6Initial IssueRepair-AdjustmentREP 9.5 LVPS PWBParts List on PL 10.1RemovalCAUTIONThese components are susceptible to electrostatic discharge. Observe all ESD procedures toavoid damage.WARNINGSwitch off the power and disconnect the Power Cord.1. Remove Tray 1.2. Remove the Left Interface Cover Assembly (REP 1.1).3. Remove the Left Cover (REP 1.2).4. Remove the Front Cover Assembly (REP 1.6).5. Remove the Left Front Cover (REP 1.7).6. Remove the Left Plate Assembly (REP 1.11).7. Remove Plate Handle (REP 1.12).8. Disconnect the Main Switch (Figure 1).9. Disconnect P/J11, PN1, P/J282, P/J283, P/J284, P/J285 and P/J281.10. Remove the four screws that secure the LVPS PWB to the printer (Figure 1).11. Remove the LVPS PWB (Figure 1).Figure 1 LVPS PWBReplacement1. Reinstall the components in the reverse order.REP 9.6 HVPS PWBParts List on PL 10.1RemovalCAUTIONThese components are susceptible to electrostatic discharge. Observe all ESD procedures toavoid damage.WARNINGSwitch off the power and disconnect the Power Cord.1. Remove Tray 1.2. Remove the Front Cover Assembly (REP 1.6).3. Remove the Left Front Cover (REP 1.7).4. Remove the MBF Chute Assembly (REP 4.1).5. Remove the Paper Handler Assembly (REP 5.1).6. Remove the BTR Assembly (REP 7.1).7. Remove the Transport Chute Assembly (REP 6.1).8. Disconnect P/J261 from the HVPS PWB (Figure 1).9. Disconnect PRB (red) (Figure 1).10. Remove the screw that secures the HVPS PWB housing to the printer (Figure 1).11. Remove the HVPS Assembly Housing from the printer (Figure 1).12. Carefully disconnect the DTS (white) and TR (red) wires from the HVPS (Figure 2).13. Releasing the two hooks that secure the HVPS PWB to the Housing, remove the HVPSPWB (Figure 2).Figure 1 Transport Chute Assembly
