DocuMate 515 Scanner User’s Guide 65Scanning from the TWAIN Interface5. When you’re finished scanning items, click Done to close theAdvanced Interface.6. The scanned images will appear in PaperPort, or other TWAINapplication you’re using.Adjusting the Image with the Advanced InterfaceYou can adjust the scan settings on the Advanced Interface to producethe best possible image for the documents you’re scanning.1. On the left side of the Advanced Interface, select a configuration.2. Click a setting in the list of settings, or click its corresponding buttonon the right side of the Advanced Interface.NOTE: If you want to preview a document before scanning from theADF, make sure only one page is loaded into the scanner.1. Click the Preview button.2. The scanner scans the item and displays a preview image.3. Adjust the Brightness, Contrast, and Resolution until the pictureis what you want. You can also change the picture type again, forexample, from color to grayscale.4. When you are satisfied with the preview image, remember to placethe document into the ADF again if you’re scanning a stack ofpages. Click Scan.ResolutionBrightness/ContrastColor (Gamma, Saturation,and Hue)Scan SizeNOTE: The scan settings for a configuration applies only to that typeof configuration. For example, the Black&White Configuration does nothave a setting for the Color Hue.
