DocuMate 515 Scanner User’s Guide 21ScanningScanning from One TouchOne Touch is your main scanning interface for using the scanner. TheOne Touch Buttons on the scanner mirror the One Touch Button Panel.The Default One Touch SettingsBased on the recommended installation of PaperPort and the scannerdriver, your scanner is pre-configured to scan items for various basictasks, such as email or printing, then send the scanned image to anappropriate, pre-selected Destination Application. The names on theOne Touch Button Panel correspond to the scanner buttons and indicatetheir original factory settings.The eMail button is set up to scan documents then immediately attachthem to a new email message in your default eMail program. The emailapplication will default to the email program specified in the internetoptions of Internet Explorer.The Copy button is set up to send the scanned image directly to yourcomputer’s printer without opening the scanned image in an application.This essentially means you can use your scanner as if it is a copier.The Scan button is pre-configured to scan your documents in the PDFformat then open them in the PaperPort application that you received withyour scanner.See the section, “Configuring the One Touch Buttons” on page 25, tochange the settings of the One Touch buttons.The scanner buttons mirror the One Touch Button Panel.NOTE: The default page size in each configuration is based on yourcomputer’s Windows setup of United States or Metric units.• If United States is the selected measurement, the default page sizein each profile will be based on the United States standard pagesizes such as 8.5” x 11”.• If Metric is the selected measurement, the default page size in eachprofile is based on the ISO 216 standard and the majority of theprofiles will default to A4.
