Siemens SINUMERIK 840D Function Manual

Also see for SINUMERIK 840D sl: Manual Function manual Function manual Function manual Function manual

$AC_TIME Time from the start of the block (real) in seconds(including the times for the internally generated in‐termediate blocks)$AC_TIMES Time from the start of the block (real) in seconds(without times for the internally generated intermedi‐ate blocks)$AC_TIMEC Time from the start of the block (real) in IPO steps(including steps for the internally generated inter‐mediate blocks)$AC_TIMESC Time from the start of the block (real) in IPO steps(without steps for the internally generated intermedi‐ate blocks)$AC_DTBB Distance from beginning of block in BCS(Distance to begin, baseCoor) (real)$AC_DTBW Distance from beginning of block in PCS(Distance to begin, workpieceCoor) (real)$AA_DTBB[] axial distance from beginning of block in BCS(Distance to begin, baseCoor) (real)$AA_DTBW[] axial distance from beginning of block in PCS(Distance to begin, workpieceCoor) (real)$AC_DTEB Distance to end of block in BCS (Distance to end)(Distance to end, baseCoor) (real)$AC_DTEW Distance to end of block in PCS(Distance to end, workpieceCoor) (real)$AA_DTEB[] axial distance to end of movement in BCS(Distance to end, baseCoor) (real)$AA_DTEW[] axial distance to end of movement in PCS(Distance to end, workpieceCoor) (real)$AC_PLTBB Distance from beginning of block in BCS(Path Length from begin, baseCoor) (real)$AC_PLTEB Distance to end of block in BCS (Distance to end)(Path Length to end, baseCoor) (real)$AC_VACTB Path speed in BCS(Velocity actual, baseCoor) (real)$AC_VACTW Path speed in PCS(Velocity actual, workPieceCoor) (real)$AA_VACTB[] Axis velocity in BCS(Velocity actual, baseCoor) (real)$AA_VACTW[] Axis velocity in PCS(Velocity actual, workPieceCoor) (real)$AA_DTEPB[] axial distance-to-go for oscillation infeed in BCS(Distance to end, pendulum, baseCoor) (real)$AA_DTEPW[] axial distance-to-go for oscillation infeed in PCS(Distance to end, pendulum, workpieceCoor) (real)$AC_DTEPB Path distance-to-go for oscillation infeed in BCS(not P2) (Distance to end, pendulum, baseCoor) (re‐al)$AC_DTEPW Path distance-to-go for oscillation infeed in PCS(not P2) (Distance to end, pendulum, workpiece‐Coor) (real)P5: Oscillation15.6 Data listsAxes and spindlesFunction Manual, 06/2019, A5E47437747B AA 613