start_h5.fmA31003-H3590-S100-7-7620, 06/2012HiPath 3000/5000 V9, Service documentation 6-13Nur für den internen Gebrauch Startup and Administration HiPath 5000Server NetworkingBandwidth Requirements for Additional Services:The specified values represent the load in relation to a maximum call volume of 1400 BHCA(this is the maximum traffic with a connected call center solution).Bandwidth Requirements for Administration (valid only for HPCO):The specified bandwidth represents the worst case scenario. In other words, an entire CDB issent to the server from the HiPath node every 30 seconds (max.) as a result of the synchroni-zation process configured in the system.It is difficult to define an accurate value at the moment due to the lack of data from the field.However, the bandwidth requirement will, in practice, be well below 132 Kbps, or there will beshort-term peaks during which this value will be required by the network.In practice, the most frequent application is the call up of key programming by users. A block of64 KB is transferred in this process. An accepted period of 30 seconds for the transmission pro-cess results in bandwidth requirements of 18 Kbps.Type Record size Bandwidth requirementBusy signaling(optiClient Attendant)300 bytes 3 KbpsCall detail records 200 bytes 1 KbpsACD information 3.5 K 10 KbpsType Record size Bandwidth requirementSynch by Hicom per TFTP 607232 bytes 132 Kbps
