boards.fmA31003-H3590-S100-7-7620, 06/2012HiPath 3000/5000 V9, Service documentation 3-75Nur für den internen Gebrauch Boards for HiPath 3000Central BoardTechnical Specifications● Nominal voltage range: 100 VAC - 240 VAC● Nominal frequency: 50 Hz - 60 Hz● Ring voltage generator 75 Vac, 20/25/50 Hz● Partial voltages: +5 VDC, -48 V● Battery charger: 4 x 12 V (40,8 V-55,2 V)● Power consumption: 180 W● Bridging timesTable 3-28 lists the maximum possible bridging times (emergency battery operation in caseof power failure) with four batteries (4 x 12-V/7-Ah batteries) and Powerbox PB3000(S30177-U773-X), depending on the system.7 DangerDo not use 24-V batteries (S30122-K5403-X) in conjunction with UPSC-DR as anexplosive gas (hydrogen + oxygen) escapes when the battery is overloaded.Table 3-28 UPSC-DR - Bridging Times with four Batteries V39113-W5123-E891 (4 x12-V/7-Ah Batteries) and Powerbox PB3000System Power supply unit Load levels Maximum bridg-ing timeHiPath 3300 UPSC-DR4 x 12-V/7-Ah batter-iesNormal output load =5 V: 3 A; –48 V: 0.5 A;ringing approx. 2 VA3 hHiPath 3300 UPSC-DRPowerbox PB3000with 1 x LUNA2 and 4x 12-V/7-Ah batteriesNormal output load =5 V: 3 A; –48 V: 0.5 A;ringing approx. 2 VA3 hHiPath 3500 UPSC-DR4 x 12-V/7-Ah batter-iesNormal output load 100 % =5 V: 8 A; –48 V: 1.1 A;ringing approx. 4 VA1 h 30 minHiPath 3500 UPSC-DR4 x 12-V/7-Ah batter-iesNormal output load 60 % =5 V: 4.8 A; –48 V: 0.66 A;ringing approx. 2 VA2 h 20 minHiPath 3500 UPSC-DRPowerbox PB3000with 1 x LUNA2 and 4x 12-V/7-Ah batteriesNormal output load 100 % =5 V: 8 A; –48 V: 1.1 A;ringing approx. 4 VA1 h 30 min
