System Data Nur für den internen GebrauchA31003-H3590-S100-7-7620, 06/20122-28 HiPath 3000/5000 V9, Service documentationsysdat.fmHiPath 3000Trunk BoardsTable 2-11 Trunk Boards for HiPath 3550BoardNameCapacity Coun-tryType/DescriptionPorts per boardB channels per boardMax. number ofboards per systemROWUSATCAS-2 2 6011 TCAS-2 provides two E1 CAS interfaces which, combined, can support up to 60 B channels. As HiPath 3550 supports amaximum of 30 B channels, a total of up to 30 B channels may be used.1 x22 For selected countries only- Board for supporting country-specificCAS (Channel Associated Signaling) protocolsTLA 2 # 3 x - Trunk board for analog linesTLA4 4 # 3 x - Trunk board for analog linesTLANI2 2 # 3 x x Trunk board for analog lines including ALUMTLANI4 4 # 3 x x Trunk board for analog lines including ALUMTLANI8 8 # 3 x x Trunk board for analog lines including ALUMTLA8 8 # 3 x - Trunk board for analog linesTS2N 30 30 1 x - Board for primary rate access; can be used for tie trunk traf-fic.In HiPath 3000/5000 V5.0 and later, the B channels in theTS2N board are subject to license. Consequently, theTS2N boards (S30810-Q2913-X300) have been assigneda new hardware identification code. The new code preventsthe board from being used in earlier versions. Functionalityand layout of the board have not been changed.STLS2 2 4 # 3 x - Board for ISDN basic rate access.Configuration of ISDN trunks, tie trunks, and stations (nofeeding) on the same board is possible.STLS4 4 8 # 3 x xTST1 1 24 1 - x PRI boardTMGL4 4 # 3 - x Trunk board for analog linesTMQ4 4 8 # 3 - x BRI board
