Samsung OfficeServ 7000 Series Programming Manual

Also see for OfficeServ 7000 Series: System administration guide User guide User instruction User guide User guide

Contents

CHAPTER 2. MMC Programming2-4 © SAMSUNG Electronics Co., Ltd.[101] CHANGE USER PASSCODEAllows the system administrator or technician to reset any phone’s passcode to its defaultvalue of ‘1234’. This MMC cannot display station passcodes; it can only reset them todefault.Phone users can set or change their individual passcodes. The passcode is used to lock orunlock the phone for toll restriction (call barring) override and to access the DISA feature.CONDITIONS The passcode of a station performing Operator Level Programming or TechnicianLevel Programming cannot be changed while the program mode is ‘ENABLE’. An Operator or Technician Level can only delete the passcode of a station and resetthe passcode to the default value, ‘1234’, not permitting to know the passcode.Default passcodeDefault passcode cannot be used for toll restriction override or for DISA access.DEFAULT DATAALL STATION PASSCODES: 1234ACTION DISPLAY1) Press Transfer button and enter 101.Display shows:[201] PASSCODEPASSCODE:****2) Dial phone number. (e.g., 205)OR[205] PASSCODEPASSCODE:****Use Volume button to scroll through phone numbers andpress Right Soft button to move the cursor right.3) Press Hold button to reset passcode. [205] PASSCODEPASSCODE:12344) Press Transfer button to save and exit.ORPress Speaker button to save and advance to next MMC.RELATED ITEMSMMC 100 STATION LOCK