CHAPTER 2. MMC Programming2-376 © SAMSUNG Electronics Co., Ltd.[836] H.323 GK OPTIONSProvides a means to set the H.323 gatekeeper parameters for an optional, external industry-standard H.323 network gatekeeper, using Registration, Admissions and Status (RAS). Thesettings apply system wide.MMC [836]This program may not be available in certain OfficeServ models.When changing IPWhen changing any IP address/value, listed below, three digits must be input foreach (octet) field. Example 192.168.1.10 input must be: 192 168 001 010No Parameter Description Default00 GK CONNECTION This enables the H.323 call to connect to agatekeeper.DISABLE01 GK REGISTERED Display the status of registration to the Gatekeeper. NO02 GK ROUTING This enables routing of calls through a gatekeeper. DISABLE03 GK RAS TYPE Select if AUTO or MANUAL, depending on yourgatekeeper’s capabilities.AUTO04 GK IP ADDRESS This is the gatekeeper’s IP address. 0.0.0.005 ALTER GK IP ADDR This provides an alternate gatekeeper address. 0.0.0.006 GK NAME This is the alphanumeric identifier of the gatekeeper.(Up to 16 characters.)‘Gatekeeper’07 H.323 ID This is the H.323 identifier used by the MGI whenregistering with the gatekeeper. (Up to 32characters.)‘OfficeServ’08 E.164 ID This is the E.164 identifier used by the H.323 trunkwhen registering with the gatekeeper. (Up to 16digits long.)123409 GK KEEP ALIVE This is the timer that the MGI uses to acknowledgethe presence of the gatekeeper. The range is000~999 seconds.0 SEC10 GK DOWN ROUTE This provides an alternate route if the primarygatekeeper is down. Selections are PSTN or ALTERGK.PSTN11 URQ REASONMODESelect ON or OFF for use of Un-register RequestRAS (URQ) messages.ON
