OfficeServ 7000 Series Call Server Programming Manual© SAMSUNG Electronics Co., Ltd. 2-307[759] CLI RINGINGThis MMC assigns a specific CLI number received from the central office to a specific ringplan destination. Also allows you to reject a specific CLI number and assign priorities.There are 9 priority levels: priority 1 is the highest and priority 9 is the lowest.It also allows you to select the ring tone heard at a phone when called by a specific CLInumber. There is also a cadence control option to perform a similar function for SLTs.There are eight ring tones available along with a Follow Station (NO) option. There arefive cadences and a Follow Station option (NO) for SLTs. The CLIDEFAULT DATANONEOption DescriptionCLI CLI number to be received from the central office. Up to 16 digits may beentered.REJ CLI call reject option. When this sets YES, if a call comes that matched CLInumber and CLI field then the system will be reject call.PRI CLI priority option. There are 9 priority levels: priority 1 is the highest andpriority 9 is the lowest. When calls into station group come and groupmembers are all busy, the system will assign a priority to the CLI number sothat calls from a high priority CLI number will be placed at the front of thegroup queue.If this option sets NO, the longest call that placed at the group queue hasthe highest priority.R1: XXX, R2: XXX,R3: XXX, R4: XXX,R5: XXX, R6: XXXRing plan and destination during each ring plan. The destination can be astation, station group.TONE Ring Tone options for a specific CLI at DGP/ITP. (NO, 1~8)No Calls will ring with the phone users choice of ring frequency.1~8 Calls from the programmed CLI number will ring phones with thisring frequency.CAD Ring Cadence options for a specific CLI Number at SLT’s (NO, 1~5)No Calls will ring with the normal SLT ring cadences.1~5 Calls from the programmed CLI number will ring SLT’s with this ringcadence.1: intercom ring, 2:CO ring, 3: DOOR ring, 4:ALARM, 5:CALLBACK
