OfficeServ 7000 Series Call Server Programming Manual© SAMSUNG Electronics Co., Ltd. 2-273EXAMPLES OF VM/AA OPERATION (IN-BAND DTMF DIGIT STRING)In the following example, all call and type data is turned on unless otherwise stated.X is the separator digit, all-default values are used in these examples and [ ] is not used.A DIL 701 calls a VM/AA port or group:[1] + [701] + [ ] + [ ]In the above example, if Trunk Line information is not used:[ ] + [ ] + [ ] + [ ] (Nothing is used)DIL 701 calls a call-forwarded station (205):[2] + [205] + [X] + [701]In the above example, if forward information is not used:[ ] + [205] + [X] + [701]In the above example, if forward and DN2/Trunk Line information is not used:[ ] + [205] + [ ] + [ ]DIL 701 calls group 501 that overflows to VM/AA:[4] + [501] + [x] + [701]In the above example, if overflow information is turned off:[ ] + [ ] + [ ] + [ ] (Nothing is sent)A DID call rings the VM/AA directly:[B] +[9999] +[ ] +[ ]9999 are the DID digits from Trunk LineIn the above example, if did information is turned off:[ ] + [9999] + [ ] + [ ]A station transfers (blind or screened) a call (Trunk Line, DID or intercom) to VM/AAgroup or port. When the transferring station hangs up (blind transfer):[ ]+[ ]+[ ]+[ ] (Nothing is sent)A station (202) transfers a Trunk Line call (702) to a station (225) that is Call Forward Allto a VM/AA group or port. When the transferring station hangs up (blind transfer) and theVM/AA group or port answers:[2] + [225] + [x] + [702]
