Samsung OfficeServ 7000 Series Programming Manual

Also see for OfficeServ 7000 Series: System administration guide User guide User instruction User guide User guide

Contents

CHAPTER 2. MMC Programming2-348 © SAMSUNG Electronics Co., Ltd.[824] NETWORK DIAL TRANSLATIONAssigns the digit translation table used for networking. Generally, under networkingconditions, you must dial the node ID and extension number to call the another nodeextension. In this MMC, the system provides a simple digit translation so that the user needonly dial the extension number to call the station on the other node. The access digit needsto be programmed in MMC 724 (‘LCR-01’ parameter in NETWORK NUMBER option)first. The system allows 96 entries for network dial translation.DEFAULT DATANONEACTION DISPLAY1) Press Transfer button and enter 824.Display shows:01:601SIZE:0 MAX:002) Dial the entry number.OR01:601_SIZE:0 MAX:00Press Volume button to select and press Right Softbutton to move cursor.3) Enter digit string for access to node (max. 8 digits)and press Right Soft button to move cursor.01:60160201SIZE:0 MAX:004) Enter number of digits user will dial. (e.g., 3 for 3-digit extension)01:60160201SIZE:3 MAX:00ORPress Volume button to select and press Right Softbutton to move cursor.5) Enter max. number of digits system will dial.OR01:601 (60201SIZE:3 MAX:08Press Volume button to select and press Right Softbutton to move cursor.6) Enter YES/NO to display other node extension ininternal extension number format.01:601 (60201DISP:N MBX:NORPress Volume button to select and press Right Softbutton to move cursor.