Samsung OfficeServ 7000 Series Programming Manual

Also see for OfficeServ 7000 Series: System administration guide User guide User instruction User guide User guide

Contents

CHAPTER 2. MMC Programming2-88 © SAMSUNG Electronics Co., Ltd.[305] ASSIGN FORCED CODEThis MMC allows one of the four options to be selected: the assignment of account codeswith verification, account codes without verification and authorization codes (or none ofthese) on a per-station basis or on an all-station basis. The system supports 500authorization codes and 999 account codes which may or may not require verification.No Type Description0 NONE No Account or Authorization code required. (strictly voluntary)1 AUTHORIZE CODE Forces user to enter a valid Authorization code of four ormore digits listed in the AUTHORIZATION CODE Table.(MMC 707)2 ACCT VERIFIED Forces user to enter a valid Account code listed in theACCOUNT CODE Table. (MMC 708)3 ACCT NO VERIFIED Forces user to enter an Account code which is not verified.User can enter any code up to 12 digits. (including ∗ and #)DEFAULT DATANONEACTION DISPLAY1) Press Transfer button and enter 305.Display shows.[201] FORCD CODENONE2) Dial station number. (e.g., 205)OR[205] FORCD CODENONEPress Volume button to select station and press RightSoft button to move cursor.3) Dial a feature option 0-3. (e.g., 2)OR[205] FORCD CODEACCT VERIFIEDPress Volume button to select option and press RightSoft button to return to step 2.4) Press Transfer button and enter to exit.ORPress Speaker button to advance next MMC.RELATED ITEMSMMC 707 AUTHORIZATION CODEMMC 708 ACCOUNT CODE