OfficeServ 7000 Series Call Server Programming Manual© SAMSUNG Electronics Co., Ltd. 2-167[501] SYSTEM TIMERSAllows the technician to adjust individual timers as necessary.TIMER TABLETimer Name Default Range Unit DescriptionAA INT DGT TIME 05 1~25 SEC Inter-digit time(This option may not be available in certainOfficeServ models.)AA NO ACT TIME 10 1~25 SEC Time for AA to transfer the incoming call tooperator in case of no digit input within thespecified time limit.(This option may not be available in certainOfficeServ models.)AA TRANS TIME 02 0~25 SEC This is latency time before AA tranfer inboundcall to another recipient.(This option may not be available in certainOfficeServ models.)ALARM TIME 100 0-2500 MIN This is the time the system alarm key will startringing after the alarm key has been silenced.ALERT TONE TIME 1000 100-2500MSECThis timer sets the duration of the attentiontone preceding a call to a phone in the VoiceAnnounce or Auto Answer mode. This tonewill also precede a forced Auto Answer call.ALM REM.INTERVAL 25 1-250 SEC This timer controls the time between ringattempts at a station when alarm reminder isset.ALM REM RING OFF 10 1-25 SEC This timer controls the length of the ring cycleduration when an alarm reminder is set at astation.ATT. RECALL TIME 30 0-250 SEC This controls how long a transfer recall willring at a station before recalling the operator.AUTO REDIAL INT. 30 1-250 SEC This timer controls the time between attemptsafter RETRY dialing is set on a station.AUTO REDIAL RLS. 45 1-250 SEC This timer controls the duration of a Ring NoAnswer condition on a retry number dialedbefore the auto redial is automaticallycancelled.BOOTH TIME OUT(Hotel application only)005 0-250 MIN Controls the time for which a booth phone isenabled.CALLBACK NO ANS 30 1-250 SEC This timer controls the time before thecallback is automatically cancelled when acallback detects Ring No Answer.
