Panasonic H-55LFV60U Operating Instructions Manual

Contents

Panasonic H-55LFV60U Operating Instructions Manual Manual pdf 50 page image

English50■ [Multi control auto setting]In a serial daisy chain connection, this automaticallyassigns ID numbers to subsequent-stage displays basedon the ID number of the first display.Note● If this setting is made on a display other than thefirst one, display ID numbers may overlap amongthe preceding-stage displays and subsequent-stagedisplays. It is recommended to perform this setting onthe first display.Select [Multi control auto setting] with andpress .10192.168.0.8Multi control auto settingStatusDisplay IDStartNetwork control / IP addressDisplay IDWaitYesOffChanging network controlThe following screen is displayed on the subsequent-stage displays.0192.168.0.8Multi control auto settingStatusDisplay IDNetwork control / IP addressWaitOff[Status]Displays the execution state of the display ID autosetting.[Wait]:ID auto setting has not been executed yet.[Finished]:ID auto setting is completed.[Display ID]Displays the current display ID.[Network control / IP address]Displays [On] / [Off] of [Network control] function andIP address.Set each item.10192.168.0.8Multi control auto settingStatusDisplay IDStartNetwork control / IP addressDisplay IDWaitYesOffChanging network control[Display ID]Sets the ID you want to assign to the display you areoperating.1 to 100Note● ID numbers are not automatically set for thepreceding-stage displays before the display on whichthe operation is performed.[Changing network control]Sets whether to change settings in [Network control]or maintain the current settings.[No]:Maintains the settings.[Yes]:Switches [Network control] to [On] when it is set to[Off], and switches [DHCP] to [On].Select [Start] and press .Starts auto setting.The following screen is displayed when the settingis completed.1192.168.0.8Multi control auto settingStatusDisplay IDNetwork control / IP addressFinishedOn● When [DHCP] is set to [On], IP address is updatedautomatically.The following screen is displayed on the subsequent-stage displays.2192.168.0.9Multi control auto settingStatusDisplay IDNetwork control / IP addressFinishedOn● For each subsequent-stage display, an ID numberwith 1 added to the ID number of each preceding-stage display is assigned.If the ID number of the preceding-stage display is“100”, ID number “1” is set.● When [DHCP] is set to [On], IP address is updatedautomatically.