3.2 Viewing Still Images on Your Mobile PhoneStill images from the camera can be viewed with a compatible mobile phone.ABCDHIJFGEA. Press [4] or [6] to pan the lens left or right, respectively, orpress [2] or [8] to tilt the lens up or down, respectively.When the lens has reached the end of its pan or tilt range,the corresponding number will not be displayed.B. Press [5] to refresh the image.C. Press [0] to toggle between the available imageresolutions (192 ´ 144 and 320 ´ 240). You can set thedefault image resolution for when viewing with your mobilephone (see Page 159).D. Select [Home Position] to move the lens to the homeposition.E. Press [1], [3], [7] or [9] to move the lens to the first fourpresets (presets 1–4).F. For presets 5–8, select the corresponding preset name tomove the lens to the desired position.G. BL-C230 only: Controls the output signals of the externalI/O interface (see Page 168).H. Select [Alarm Log] to view the last 50 external sensor andmotion detection trigger logs (see Page 94).• You must be logged in to the camera as anadministrator to use this feature.I. Select [Buffer/Transfer] to view the image buffer andtransfer control page (see Page 95).• You must be logged in to the camera as anadministrator to use this feature.J. Select [Privacy Mode] to turn privacy mode on. (You maybe asked to enter the administrator user name andpassword.) To turn privacy mode off, access the cameraagain and select [Disable Privacy Mode].• You must be logged in to the camera as anadministrator to use this feature.Note• When accessing the camera as a general user or as a guest user, certain features may be disabledaccording to the [Access Level] set for the user (see Page 152 and Page 155).• If the camera is configured to allow access from guest users (i.e., anonymous users; see Page 155),users can access the camera’s mobile phone pages using a mobile phone or PC without entering auser name or password. If guest user access is permitted, you can log in as the administrator byselecting [Alarm Log], [Buffer/Transfer], or [Privacy Mode], and then entering the user name andpassword when the authentication dialog is displayed.92 Operating Instructions3.2 Viewing Still Images on Your Mobile Phone
