Panasonic BL-C210 Series Operating Instructions Manual

Also see for BL-C210 Series: Comparison chart Specifications Installation guide Setup guide Setup guide

Contents

Panasonic BL-C210 Series Operating Instructions Manual Manual pdf 109 page image

4.2.2 Configuring the Camera to Use a Third-party Dynamic DNSServiceBefore configuring the camera to use a third-party Dynamic DNS service, you will first need to subscribe to thedesired service. Ask the Dynamic DNS service provider for the settings required to use that service.Note• Certain third-party Dynamic DNS services may not be compatible with your camera. We cannotguarantee that your camera will be compatible with third-party Dynamic DNS services, and thereforewe cannot take responsibility for any damage or performance issues that may occur when using aDynamic DNS service other than Viewnetcam.com (see Page 105).• Please direct any questions you may have regarding the settings required to use a third-party DynamicDNS service to the Dynamic DNS service provider.• After configuring the camera to use a third-party Dynamic DNS service, it may take several minutesbefore the camera can be accessed over the Internet.1. Click the [Setup] tab.2. On the left side of the screen under [Basic], click [DynamicDNS].3. Select [User-specified DynamicDNS], then click [Next].4. Enter the URL (including http://)*1 provided or required by your Dynamic DNS service provider (max.255 characters).5. Select how often the camera notifies the Dynamic DNS service of its current global IP address.6. Enter the user name*2 provided by the Dynamic DNS service provider (max. 63 characters).Operating Instructions 1094.2.2 Configuring the Camera to Use a Third-party Dynamic DNS Service