Panasonic BL-C210 Series Operating Instructions Manual

Also see for BL-C210 Series: Comparison chart Specifications Installation guide Setup guide Setup guide

Contents

Panasonic BL-C210 Series Operating Instructions Manual Manual pdf 174 page image

7.8 Built-in Alarm SettingsThe camera’s built-in alarm can sound when the built-in sensor, external sensor, or motion detection istriggered. You can set when the built-in alarm sounds, as well as the built-in alarm volume and the built-inalarm sound type. After saving these settings, confirm the built-in alarm volume and sound type by clicking[Sound Alarm] on the single camera page.1. Click the [Setup] tab.2. On the left side of the screen under [Advanced], click [Built-in Alarm].3. Under [Trigger for Built-in Alarm], select when the built-in alarm sounds.– [Button or sensor]: The built-in alarm sounds when [Sound Alarm] is clicked on the single camera pageand when the built-in sensor, external sensor, or motion detection is triggered.– [Button only]: The built-in alarm sounds only when [Sound Alarm] is clicked on the single camera page.– [Sensor only]: The built-in alarm sounds only when the built-in sensor, external sensor, or motiondetection is triggered, and the [Built-in Alarm] button is not displayed in the operation bar.– [Off]: The built-in alarm does not sound, and the [Built-in Alarm] button is not displayed in the operationbar.4. Under [Built-in Alarm Volume], select the volume of the built-in alarm.5. Under [Built-in Alarm Sound Type], select the built-in alarm sound type.6. Click [Save].Note• The built-in alarm does not sound when the sound detection feature is triggered (see Page 54).174 Operating Instructions7.8 Built-in Alarm Settings