1.2.2 Aiming the Camera LensThe camera can be panned from -41 ° to +41 ° from the center position, and tilted from -32 ° to +10 ° from thecenter position. If the [Pan/Tilt Range] button was used to limit the maximum pan and tilt range of the camera(see Page 28), the lens can only be moved to the maximum pan or tilt range allowed.ABA. Pan: -41 ° to +41 °B. Tilt: -32 ° to +10 °There are several ways you can move the camera lens to view the desired image, as described in this section.Click to centerAllows you to quickly and easily center the camera image on the desired point. Simply move the mouse cursorto the desired point in the camera image, and click. Note that the camera may not be able to center on theclicked point if it is outside of the pan and tilt range of the lens.This feature can be disabled for general users (see Page 152) and for guest users (see Page 155). Note,however, that if the click to center feature is disabled, users can still use this feature when using the ActiveXzoom feature. Users can click to center the image within the zoomed area, but the lens will not pan or tilt.Pan and tilt scan buttonsAllow you to pan or tilt the lens to its maximum pan or tilt range. The lens returns to the original position whenfinished. You can click an area of the camera image to stop the scan operation and center the camera imageon the desired point.This feature can be disabled for general users (see Page 152) and for guest users (see Page 155).Navigation buttonsAllow you to pan the lens left and right, and tilt the lens up and down. Click the center navigation button tomove the lens to the home position.26 Operating Instructions1.2.2 Aiming the Camera Lens
