Panasonic BL-C210 Series Operating Instructions Manual

Also see for BL-C210 Series: Comparison chart Specifications Installation guide Setup guide Setup guide

Contents

Panasonic BL-C210 Series Operating Instructions Manual Manual pdf 142 page image

5.6 Changing Basic Camera SettingsThe [Camera] page of the [Setup] tab allows you to adjust basic camera features.1. Click the [Setup] tab.2. On the left side of the screen under [Basic], click [Camera].3. Set the following parameters as desired.a. Under [AC Power Source Frequency], select the desired setting.– [50 Hz]: Select this item if your AC power source operates at 50 Hz.– [60 Hz]: Select this item if your AC power source operates at 60 Hz.Note• Screen content varies by model number.b. Under [Return to Specified Position], select whether you want the camera to move the lens to a specificpreset position after a specified period of inactivity.i. Select the length of time (inactivity) that passes before the camera moves the lens. If this settingis too short, you may have difficulty registering presets because the lens will return to the specifiedposition before you have saved your new preset.ii. Select the desired preset position (see Page 29).c. Under [Shutter Speed/Color Night View], select whether the camera’s shutter speed is fixed, or whetherthe color night view mode feature automatically adjusts the shutter speed when the camera image isdark.i. To set the shutter speed, select [Shutter Speed], then select the desired speed from the pull-downmenu.• The available shutter speeds depend on the [AC Power Source Frequency] setting, as follows:50 Hz: 1/25 s, 1/50 s, 1/100 s60 Hz: 1/30 s, 1/60 s, 1/120 s142 Operating Instructions5.6 Changing Basic Camera Settings