5.2 HTTPS SettingsThe camera supports HTTPS connections. When accessing the camera using HTTPS, data sent between thecomputer and camera is encrypted, providing increased security. To access the camera using HTTPS, seePage 120.1. Click the [Setup] tab.2. On the left side of the screen under [Basic], click [HTTPS].3. Set the following parameters as desired.a. Under [HTTPS], select [Use HTTPS] if you want to use the HTTPS feature.b. If [HTTPS] is set to [Use HTTPS], enter the IP address or host name of the server that contains theSSL key under [Certificate Information].*1• Generally the camera’s IP address can be entered here.4. Click [Save].• It may take up to 5 minutes to receive the SSL key. The camera cannot be accessed using HTTPSuntil the SSL key is received.5. When the [Success!] message is displayed, click [Restart].• All images buffered in the internal memory are deleted when the camera is restarted.Note• When the camera is configured for HTTPS access, it cannot be accessed using HTTP. Similarly, whenthe camera is configured for HTTP access (i.e., when [HTTPS] is set to [Use HTTP]), it cannot beaccessed using HTTPS.• When configuring the camera for access from the Internet, enter the IP address or host name used toaccess the camera over the Internet next to [Camera IP Address or Host Name]. In this case a securitywarning will be displayed when accessing the camera over the local network.• When accessing the camera using HTTPS, the following may occur.– Frame rate may decrease and camera response time may increase.– It may take a while to display images.– Images may break up or audio may be interrupted at the beginning of the access.• BL-C210A/BL-C230A only: If [HTTPS] is set to [Use HTTPS], the camera cannot be accessed froma TV and you cannot set the camera to registration mode (see Page 172).*1 [Space], ["], ['], [&], [<], and [>] cannot be entered.Operating Instructions 1195.2 HTTPS Settings
