100 Adjustments and Settings for Recording: Handling data13 When the jog dial button is pressed, the followingmessage appears.14 Turn the jog dial button to move the arrow (cursor) toYES, and press the jog dial button.The current white shading correction value, the flarecompensation value, and the RB gain offset correctionvalue are stored in the built-in memory of the unit.¡NoteThe values will not be stored in the unit’s internalmemory if another menu screen is selected withoutexecuting WRITE or if the menu is exited.15 Press the MENU button.The setting menu is cleared, and the displays showingthe unit’s current statuses appear at the top and bottomof the viewfinder screen.1 Using menu operations, open the screenfrom the FILE page.2 Turn the jog dial button to move the arrow (cursor) to theFILE SELECT item.3 Press the jog dial button and the file number will flash.Turn the jog dial button to select the file (1 to 64) to beread.4 Press the jog dial button to enter the file number.5 Turn the jog dial button to move the arrow (cursor) to theREAD item.6 When the jog dial button is pressed, the followingmessage appears.7 Turn the jog dial button to move the arrow (cursor) toYES, and press the jog dial button.The recorded correction values for the white shading,flare, and RB gain offset are read.8 Press the MENU button.The setting menu is cleared, and the displays showingthe unit’s current statuses appear at the top and bottomof the viewfinder screen. To read the lens file from the builtin memory
