129Manipulating Clips with Thumbnails : Restoring ClipsManipulating Clips with ThumbnailsRestores clips that are defective as a result of suddenpowering-down during recording, or removal of the P2 cardbeing accessed.¡NoteOnly those clips with yellow defective clip indicators can berestored. Delete the clips with red defective clip indicators. Ifthe clip cannot be deleted, format the P2 card.During restoration of the clips, however, the defective-clipindicator may change from yellow to red, resulting in inabilityto restore the clips.1 Press the THUMBNAIL button.The thumbnail screen appears on the LCD monitor.2 Use the cursor buttons to move the pointer over the clipyou want to restore (defective clips are indicated bydefective clip indicators).Press the SET button to select the clip.3 Press the THUMBNAIL MENU button, and selectOPERATION REPAIR CLIP from the thumbnailmenu.4 The confirmation window appears. Use the cursorbuttons and the SET button to select YES.Incomplete clips may be generated when clips recorded onmultiple P2 cards (connected clips) are separately copied todifferent cards. Reconnection function generates one clip(the original, connected clip) from incomplete clips.1 Press the THUMBNAIL button.The thumbnail screen appears on the LCD monitor.2 Use the cursor and SET button to select incompleteclips to reconnect.Usually, thumbnails of incomplete clips (clips withmarker) are displayed in line.3 Press the THUMBNAIL MENU button and selectOPERATION RE-CONNECTION from the thumbnailmenu.4 The confirmation window appears. Use the cursorbuttons and SET button to select YES.¡Noteindication stays illuminated until all the incomplete clipsthat comprise the original clip are reconnected.Restoring ClipsReconnection of Incomplete Clips
