99Adjustments and Settings for Recording : Handling dataAdjustments and Settings for Recording1 Using the menu operations, open the screen from the FILE page.2 Turn the jog dial button to move the arrow (cursor) to theFILE SELECT item.3 Press the jog dial button and the file number will flash.Turn the jog dial button to select the file (1 to 64) to berecorded.4 Press the jog dial button to enter the file number.5 Turn the jog dial button to move the arrow (cursor) to theTITLE item.6 When the jog dial button is pressed, the arrow (cursor)moves to the title input area, and the input mode isestablished.7 Press the jog dial button again and turn it until thecharacter to be set is displayed.When the button is turned, the character displayed isswitched in the following sequence:8 Press the jog dial button to enter the character.9 Turn the jog dial button to move the arrow (cursor) to thenext position (right), and repeat steps 7 and 8 to set thecharacters (maximum of 12).10 When the title has been input, turn the jog dial button tomove the arrow (cursor) to the : position.11 When the jog dial button is pressed, the arrow (cursor)returns to the TITLE item.12 Turn the jog dial button to move the arrow (cursor) to theWRITE position.To save the lens file into the built-in memorySelect the file No.Give a title to the selected file. Space: ÐAlphabetical characters: A to ZÐNumerals: 0 to 9ÐSymbols: ', >, <, /, -, . , x