88 Adjustments and Settings for Recording: Selection of video output signalsThe MON OUT connector outputs HD SDI signals or down-converted analog signals.Set the video signals output from the MON OUT connectorby using the MONITOR OUT item on the menu (SEL> screen on the SYSTEM SETTING page).The signals output from the MON OUT connector areswitched with the OUTPUT SEL switch.However, the switching operation is not acknowledgedduring the recording operation.MEM: During EE, such as recording, video imagestaken by the camera are output. Meanwhile,signals on the P2 card are output duringplayback.CAM: The camera images are output at all times.OFF: No signal is output from the MON OUTconnector.b. MON OUT OUTPUT SEL switchSet the characters to be superimposed on the signals outputfrom the MON OUT connector in the OUTPUT ITEM item onthe menu (SETTING page).c. MON OUT CHARACTER switch¡NoteWhen VBS has been selected as the MON OUT signal andthe menu option SYSTEM MODE has been set to “1080-24PsF” and “720-60P”, the MON OUT signal is luminancesignal video. The menu option SYSTEM MODE can befound in the screen on the SYSTEMSETTING page.Settings of signals output from MON OUT connectorItem Variablerange RemarksMONITOROUTVBSHD SDISet video signals output from the MONOUT connector.VBS: Analog composite signals areoutput.HD SDI: HD SDI signals are output.bHD SDI A B TCGCHARACTER OUTPUT SELMEMCAMOFFF-RUNSETR-RUNONOFFMEMCAMOFFMON OUTc HD SDI A B TCGCHARACTER OUTPUT SELMEMCAMOFFF-RUNSETR-RUNONOFFMEMCAMOFFMON OUT
