Menu161Menu: Menu ConfigurationMenu¡Notesy The items highlighted in grey cannot be selected by .y The underlined items can only be selected by as one whole page (with all sub-items). Individualsub-items cannot be selected separately.About Menu Description TablesMenu ConfigurationUSER MENUUSER MENU SELECTSYSTEM SETTINGPAINTCAM OPERATIONSYSTEM MODEOPTION MODEREC FUNCTIONOUTPUT SELGENLOCKRGB BLACK CONTROLLOW SETTINGMID SETTINGCAMERA IDSHUTTER SPEEDSHUTTER SELECTUSER SWSW MODEWHITE BALANCE MODELENS/IRISMATRIXCOLOR CORRECTIONSYSTEM SETTINGPAINTVFCAM OPEFILEMAINTENANCEMAIN OPESKIN TONE DTLKNEE/LEVELHIGH SETTINGADDITIONAL DTLGAMMACAMERA SETTINGVF VF DISPLAYVF MARKERVF USER BOXVF INDICATOR1VF INDICATOR2MODE CHECK INDFILE SD CARD READ/WRITESD CARD R/W SELECTLENS FILESCENEINITIALIZEMAINTENANCE LENS ADJBLACK SHADINGWHITE SHADINGMENUMAIN MENUOPTION MENUOPTION! LEDMAIN OPERATIONBATTERY SETTING2MIC/AUDIO 1BATTERY/P2CARDBATTERY SETTING1UMID SET/INFOMIC/AUDIO 2TC/UBLCD MONITORDIAGNOSTIC1DIAGNOSTIC2HOURS METER1394 SETTINGRB GAIN CONTROLLENS FILE CARD R/WLENS FILE ADJHD SDI A B OUT MARKERMONI OUT MARKERVF INDICATOR3CAC ADJCAC FILE CARD READ[SELECT MODE] Opening the MenusUSER MENU:Displayed when the MENU button ispressed.MAIN MENU:Displayed when the MENU button ispressed for at least 3 seconds.OPTION MENU:Displayed when the MENU button ispressed while pressing the LIGHTbutton.Items/Data SavedAdjustableRange RemarksSCAN REVERSE OFFONThis setting is for correcting an imagewhich has been inverted by a film-uselens or anamorphic lens attached tothe unit.S C U F Ra b ca. The following letters indicate whether the modified menu data issaved to or read out from the memory.The – indicates that the data cannot be saved or read.S = Can be saved and read as scene file data.C = Can be saved or read using SD CARD READ/WRITE.U = Can be saved and read as user data.Please refer to [SCENE] (page 197) and [INITIALIZE](page 197).F = Can be read using READ FACTORY DATA.Please refer to [INITIALIZE] (page 197).R = Can set whether or not to store changes using the RC DATASAVE menu option.Please refer to [Connection of the remote control unit (AJ-RC10G)] (page 117).b. This section shows the adjustable range of the set value, andavailable options for this item.c. About the settings available for this item.
