115Preparation: Mounting the Camera on a TripodPreparation1 Connect the audio device to the AUDIO IN jack with theXLR cable.2 Set the AUDIO IN switch to [REAR] for the channel towhich the XLR cable is connected.3 Set the LINE/MIC/+48V selector switch on the rearpanel to [LINE].a. LINE/MIC/+48V selector switchb. AUDIO IN switchc. AUDIO IN jackWhen mounting the camera on a tripod, use the tripod adapter supplied with the camera.1 Mount the tripod adapter on the tripod.a. Tripod adapterb. Pan head¡NoteSelect an appropriate hole in the adapter, taking intoaccount the center of gravity of the camera and tripodadapter combined.Also, make sure that the diameter of the selected holematches the diameter of the pan head screw.2 Mount the camera on the tripod adapter.Slide the camera forward along the grooves until youhear a “click”.c. Tripod adapterd. Red levere. Black leverWhile holding the red lever down, move the black lever in thedirection of the arrow, and slide the camera backward toremove it.¡NoteIf the tripod adapter pin does not return to its original positionafter the camera has been removed, hold the red lever downand move the black lever in the direction of the arrow again,in order to return the pin to its original position.Please note that the camera cannot be mounted if the pinremains in the center.When Using Audio DevicesabcMounting the Camera on a TripodabRemoving the Camera from the Tripod Adaptercd e
