26 Parts and their Functions: Display Window FunctionsDisplay Window FunctionsP2 card/battery-remaining level and audio levelindicationsa. Media-remaining space indication barThe bar indicates the remaining free space on each P2 card,using a 7-segment display.Each segment can represent either 3 or 5 minutes of remainingfree space, depending on the value set through the menu optionCARD REMAIN/. According to the set value, the segmentsdisappear one-by-one. The menu option CARD REMAIN/ canbe found in the screen on the MAINOPERATION page.b. Battery-remaining level indication barFor a battery with a digital indicator (percentage indication), if theremaining level of the battery is higher than 70%, all 7 segmentsup to the “F” position are lit.When the remaining level falls below 70%, the segments go outone-by-one for each drop of 10%. All 7 segments can be set tolight up when the battery-remaining balance is 100%. To do soselect “100%” for the menu option BATT REMAIN FULL in the screen of the MAIN OPERATION page.c. Audio channel level meterWhen the MONITOR SELECT CH1/2 / CH3/4 switch is set to[CH1/2], the meter indicates 1 and 2 as the audio channelnumbers, together with their audio levels. When the switch is setto [CH3/4], the meter indicates 3 and 4 as the audio channelnumbers, together with their audio levels.Memory action status indicationd. Error Code Indication (for more information, see [WarningSystem] (page 155))e. Information indicationLOOP: Stays illuminated in LOOP REC mode. Forinformation about the LOOP REC mode, see [LoopRecording] (page 40).OP-SLOT: Remains illuminated when a video encoder card isoperated in the optional slot.LOOPhMEDIA E FY minM s frm13 240DVTCG TIME DATE P-iRECSLAVE HOLD GPSBATT E FOVER OVER10OO40-dB3020HDOP-SLOTCTLNDFacbLOOPhMEDIA E FY minM s frm13 240DVTCG TIME DATE P-iRECSLAVE HOLD GPSBATT E FOVER OVER10OO40-dB3020HDOP-SLOTCTLNDFdef. Mode indicationHD: Stays illuminated when the unit is in HD mode (1080i,720P).GPS: Stays illuminated when radio waves are not receivedduring GPS operation.GPS : Stays illuminated when radio waves are receivedduring GPS operation.P-REC: Stays illuminated when the PRE REC MODE is set to“ON”, and blinks when recording is continued afterthe recording tally lamp has gone out.iREC: Remains illuminated during INTERVAL REC moderecording, and blinks during a pause.i: Blinks when INTERVAL REC mode is selected.g. Time code indicationNDF: Stays illuminated when the time code is in non-dropframe mode.DF: Stays illuminated when the time code is in drop framemode.SLAVE: Stays illuminated when the time code is externallylocked.HOLD: Stays illuminated when the time code generator/reader value is frozen.CTL: Stays illuminated when the DISPLAY switch ispositioned at [CTL] to display the CTL count.TCG: Stays illuminated when the DISPLAY switch ispositioned at [TC] (or [UB]) to display the TC (or UB)generator value.TC: Stays illuminated when the DISPLAY switch ispositioned at [TC] (or [UB]) to display the TC (or UB)reader value.VTCG: Stays illuminated when the DISPLAY switch ispositioned at [UB] to display the VIUB generatorvalue.VTC: Stays illuminated when the DISPLAY switch ispositioned at [UB] to display the VIUB reader value.TIME: Stays illuminated when the DISPLAY switch ispositioned at [UB] to display the real-time hour,minute and second.DATE: Stays illuminated when the DISPLAY switch ispositioned at [UB] to display the real-time date.No Indication:The VTCG, TIME, and DATE stay off when theDISPLAY switch is positioned at [UB] to display realtime, time zone, hour and minute.Time count indication:The time code, user bits, CTL and real time areshown.¡NoteWhen the DISPLAY switch is positioned at [UB], each press of theHOLD button changes the indication through VTCG (VTC) DATE TIME No Indication (Time Zone) TCG (TC), in that order.LOOPhMEDIA E FY minM s frm13 240DVTCG TIME DATE P-iRECSLAVE HOLD GPSBATT E FOVER OVER10OO40-dB3020HDOP-SLOTCTLNDF gf
