126 Manipulating Clips with Thumbnails: Shot MarkA shot mark can be added to a clip thumbnail to distinguish this clip from the others.1 Press the THUMBNAIL button.The thumbnail screen appears on the LCD monitor.2 Use the cursor buttons to move the pointer over the clipto which you want to attach a shot mark.3 Press the SHOT MARKER button.4 A shot mark will be attached to the clip thumbnail underthe pointer.To delete a shot mark, reposition the pointer over theclip and press the SHOT MARKER button.¡Notesy A shot mark can be attached during recording. Pleaserefer to [Shot Mark Function] (page 45) for moreinformation.y When adding a shot mark to (or deleting the shot markfrom) a clip recorded across multiple P2 cards, do this withall these P2 cards inserted into P2 card slots.a. SHOT MARKER buttonDuring recording or playback, you can add text memos to clips. Text memos can be used to play back clips at some point orbreak clips into chunks and copy the necessary portions.Text memos can be added in one of the following ways.y Press the TEXT MEMO button during recording orplayback of a clip. A text memo is added to the positionwhere the button is pressed.y Press the TEXT MEMO button when the thumbnail screenis displayed. A text memo is added to the beginning of theclip.¡NoteOne clip can have up to 100 text and voice memos incombination. Note that the unit is not capable of adding orshowing voice memos.a. TEXT MEMO buttonShot MarkaText MemoAdding a text memoa
