Infrared Recording94Infrared RecordingThis camcorder features the ability to shoot movies in dark surroundings using the camcorder'sinfrared light and other sources of infrared light. Also, you can select whether the lighter areas of thepicture appear in green or white. To use the infrared light, set an assignable button to [< IR Light] oruse the menu, as described below. Make sure you attach the handle unit to the camcorder inadvance.Activating Infrared ModeFollow the procedure below to set the camcorder to infrared (IR)mode and to set the color of highlights in the picture.1 Set the INFRARED switch to ON.• ; and = appear on the screen.2 Open the [IR Rec Color] screen to select a color.[FUNC.] > [MENU] > p > [IR Rec Color]3 Touch [± White] or [² Green] and then touch [X].4 Set an assignable button to [< IR Light] (A 97).5 Press the assignable button to turn on the built-ininfrared light.• Alternatively, you can use the p > [IR Light] setting.• = changes to .NOTES• When the camcorder is in infrared mode, the following adjustments are made automatically.- Gain, shutter speed and aperture are set to automatic levels.- Autofocus is activated. However, you can change the focus mode to manual focus.- AGC limit, white balance, image effects, exposure, backlight correction, recording program andface detection & tracking cannot be set. Also, [= Instant AF] and [? Medium AF] cannot beset for the AF mode.- ND filters are not available.• Depending on the light source, autofocus may not work well while zooming.• When switching the camcorder to infrared mode, do not point the lens at strong sources of light orheat. The camcorder's sensitivity to such sources is much higher than when shooting videonormally. If there are such sources in the picture before you switch the camcorder to infrared mode,shield the lens first.Operating modes:COPY
