Uploading Recordings Using an iOS Device132Uploading Recordings Using an iOS DeviceUsing the Movie Uploader app* for iOS devices, you can wirelessly connect the camcorder to thedevice to upload your movies to YouTube and your movies and photos to Facebook even when youare away from your home network. You can even save** and play back MP4 movies and photos onthe iOS device.* The Movie Uploader app, provided by PIXELA, is available for free from the App Store.** Not available for MP4 movies recorded at 35 Mbps.POINTS TO CHECK• Before you perform this procedure for the first time, install the Movie Uploader app on your iOSdevice. The app can be downloaded for free from the following site.http://appstore.com/movieuploader1 Camcorder: Open the desired movie index screen (A 100).2 Camcorder: Open the [Movie Uploader] screen.[MENU] > s > [Wi-Fi] > [Movie Uploader]• The camcorder’s SSID (network name) will appear.• The camcorder will be ready to connect with the iOS device.• To set or change the camcorder's password, perform the procedure in Setting the Camcorder'sPassword (A 124) starting from step 2.3 iOS device: Activate Wi-Fi in the settings screen.• The network names of detected access points will appear.4 iOS device: Touch the access point with the same SSID displayed in step 2.• If you have performed this procedure before and you have not changed the camcorder'spassword, the connection will be established automatically.5 iOS device: Enter the camcorder's password set previously.• [Connected] will appear on the camcorder’s screen and the connection will be established.6 iOS device: Use the Movie Uploader app to upload the camcorder’s movies (and photos, ifapplicable).• You can also play back or save MP4 movies.7 Camcorder: Touch [End] > [OK] when finished.• After the connection has ended, the index screen will appear.Operating modes:iOS deviceCOPY
