Viewing and Changing Wi-Fi Settings140Viewing and Changing Wi-Fi SettingsWhen the camcorder is connected to an access point or to a Wi-Fi-enabled device, you can view theWi-Fi connection settings and even change them, if necessary.To enter text for the various settings, use the virtual keyboard (A 136).1 Open the [Wi-Fi] screen.[MENU] > s > [Wi-Fi]To view the smartphone’s connection settings2 Touch [Smartphone Connection].• The camcorder’s SSID will appear.• Touch [Í] and [Î] to view more information.• You can change the camcorder's password, port and operating frequency (2.4 GHz or 5 GHz).To view the access point’s connection settings2 Touch [Access Point Connection].• The four access points’ SSID settings in the camcorder’s memory will appear.• To add an access point, touch [Not configured] and then perform the procedure in Wi-FiConnection Using an Access Point (A 137). After doing so, the screen from this step will appearagain.3 Touch [w] next to the SSID of the access point whose settings you want to view.• The access point’s settings will appear.• Touch [Í] and [Î] to view more information.• To delete the settings, touch [Edit] > [Delete] > [Yes].4 If necessary, touch [Edit] > [Manual Setup] to change the settings and then perform theprocedure in Manual Setup (A 138).To view the FTP server's connection settings2 Touch [FTP Server Settings].• The FTP server's settings will appear.• Touch [Í] and [Î] to view more information.3 If necessary, touch [Edit] to change the settings.Operating modes:COPY
