Playing Back Video102Displaying scene information1 In either the AVCHD or MP4 movie index screen, touch [I].2 Touch the desired scene.• The scene information screen appears.• If the optional GP-E2 Receiver was attached to the camcorder during recording, GPS informationwill also appear.• Touch Ï/Ð to select the previous/next scene.3 Touch [K] twice when finished.IMPORTANT• Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do somay result in permanent data loss.- Do not open the double memory card slot cover.- Do not disconnect the power source or turn off the camcorder.- Do not change the camcorder’s operating mode.• You may not be able to play back with this camcorder movies recorded on a memory card usinganother device.NOTES• You can turn off the recording date and time display or change the information displayed with thes > [Data Code] setting.• Depending on the recording conditions, you may notice brief stops in video or sound playbackbetween scenes.• During fast/slow playback, you may notice some anomalies (blocky video artifacts, banding, etc.) inthe playback picture.• The speed indicated on the screen is approximate.• Slow reverse playback will look the same as continuous frame reverse.Capturing Photos During Movie PlaybackYou can capture a photo while a movie is being played back.1 Play back the scene from which you want to capture the photo.2 Pause the playback at the point where you want to capture the photo.3 Touch [PHOTO].4 Touch [Ñ] to stop the playback.NOTES• The size of the captured photos will be 1920x1080.• The date of the photos will reflect the date and time of recording of the original scene.• Photos captured from a scene with a lot of fast movement may be blurred.• Photos will be recorded on the memory card selected for recording photos.COPY
